Open Circuit Potential
An Open Circuit Potential (OCP) is, as the name suggests, the potential where no current is flowing, because the circuit is open. Between two metals in the same solution the OCP is the highest potential difference possible without applying a potential from the outside. Measuring the OCP is also non-invasive, because no current is flowing.
For more information, see the chapters on Corrosion Potential and Constant Potential vs OCP or vs Reference Electrode.
Articles
Constant Potential vs OCP or vs Reference Electrode
In this section the reasons for choosing a certain DC potential is explained. The advantages of using Ecorr as a reference point will be presented as well as how to choose in PSTrace to use potentials versus the reference electrode or versus Ecorr.
Corrosion Potential
In this chapter the Open Circuit Potential (OCP) and the Corrosion Potential are introduced. The principles of reference electrodes as well as the 0 V by convention potential of the standard hydrogen electrode (SHE) are explained.
OCP with MUX8-R2
The multiplexer MUX8-R2 offers the possibility to record reliable Open Circuit Potential (OCP) measurements in the Alternating mode, which allows to monitor the OCP of multiple samples / working electrodes over time with a single potentiostat. This is a significant improvement compared to its predecessors MUX8 and MUX16. In this application note it is demonstrated how to setup and perform an OCP measurement with the MUX8-R2 in the Alternating mode.